If your raincoat is a plastic film raincoat, when the raincoat is wet from the rain, you should immediately wipe off the water on the raincoat with a dry cloth, or take the raincoat to a cool and dry place and dry it. Plastic film raincoats cannot be placed in the sun, let alone baked on the fire. If your raincoat is wrinkled and cannot be ironed with an iron, you can soak the raincoat in warm water of 70 to 80 degrees for a minute, then take it out, put it on a flat table, and use your Spread the raincoat flat with your hands, and don’t try to pull the raincoat hard to avoid the raincoat being deformed. If the plastic raincoat is used for a long time, it is easy to degumming or break. If the hole on the raincoat is not too big, then You can choose to tinker with it yourself. The way to fix is. Put a small piece of film where the raincoat is torn, and then put another piece of cellophane on top of the film. Then use an electric iron to quickly iron it so that the film can stick to the torn opening to complete the purpose of repairing. When repairing raincoats, be sure to remember one thing: raincoats cannot be sewn with needles and threads. Otherwise, it is very likely that the raincoat will have bigger problems.
