When it rains, many students like to wear plastic raincoats to go out, especially when riding bicycles, they cannot do without plastic raincoats. However, when the raincoat is not needed, how to maintain the plastic raincoat so that it can be worn for a long time and looks good? This is related to the maintenance when it is not usually worn.
The plastic raincoat has wrinkles and cannot be ironed, because the polyethylene film will melt into a gel at a high temperature of 130 ° C. If it is a slight wrinkle, you can open the raincoat and hang it on the hanger, and let the wrinkle gradually smooth out. If the wrinkle is serious, you can soak the raincoat in hot water of 70℃-80℃ for 1 minute, and then take it out to dry, and the wrinkles will also disappear. will disappear. When soaking or after soaking, the raincoat should not be pulled by hand to avoid deformation.
After using the raincoat on rainy days, shake off the rainwater on it first, and then fold it up and put it away after drying. When storing, do not put heavy objects on the raincoat. Otherwise, over time, cracks will easily appear in the place where the raincoat is tossed.
If the plastic raincoat is stained with oil and dirt, you can lay it flat on the table, gently brush it with a soft brush dipped in soapy water, and then rinse it with water, but remember not to rub it vigorously. After washing, dry in a ventilated place to avoid sun drying.
After the plastic raincoat is degummed or cracked, you can cover the cracked place with a cloth, then cover it with a piece of cellophane, and quickly press it with an ordinary electric soldering iron (the heating time should not be too long).
